I loved designing and creating this cropped jacket that was inspired by the character Amber in the movie “Sucker Punch”.

Lace Bodysuits | Lace Body | Lace Leotards | PrettyLittleThing

It is an intriguing style with kimono sleeves and a band collar. This design fits the body beautifully and I love the way the drawstring details also play an important role in the design.

You can wear this jacket with or without the drawstring detail, it depends on your mood. With the drawstring, it gives a elaborate fantasy look, and without them you get a more casual look.

Either way the skinny lace highlights the jacket with very flattering style lines that are suitable for most occasions. This jacket requires intermediate sewing skill due to stretchy fabric and lots of zipper details.

But If you are a beginner sewer who loves a challenge, then this style is perfect for you!

Let me know if you have any questions, I will try my best to answer them. Did you use this instructable in your classroom?

Add a Teacher Note to share how you incorporated it into your lesson. Research: For my research I used a lot of reference photos of the actual movie costume.

After finding the photos that showed all the necessary views and angles, I printed them as clear and high contrast as I could. Using these photo printouts, I was able to draw the seam lines and detail lines.

This method allows me to draft a pattern that doesn’t miss any important information, but it also gives me a sense for which details may have to be omitted due to limitations.

Tools: 1 pair of good fabric scissors never use it to cut paper! Contrast Fabric: For the contrast fabric, I chose a lighter green fabric with a shinier finish about 1 yard.

Black lace panel cut out body 7 plus

I couldn’t find a light green fabric with same stretch as the main fabric, so I picked a similar thickness, but in a NON-stretch fabric. For me color was the most important.

For all of the zippers I used antiqued brass teeth with black zipper tape. Drawstring and Eyelets: the photos of the costume show a tonal colored lace trim that matches the fabric and a rat-tail styled cord for the lacing detail.

I decided to use a black eyelet lace 10 yardand black 1mm leather cords 30 Yard. Flat binding trims: This trim detail is required for the center back, on the front and back sleeve, and on the back.

If you pick the second option as I did, it will be explained in later steps. Black fusible interfacing: about 1 yard used for the collar, front and back facings Thread: 2 large spools black heavy top stitching nylon thread.

I sew it into a quick mock up to check proportions. I make sure the seams all matched correctly and nothing was funky.

Pin away extra fabric. After fitting the mock up on the dress form or yourself with the help of a friendyou may need to adjust your paper pattern pieces accordingly.

Mine was too long in the back, and the shoulder was too funky see pictures above.

I pinned away the extras fabric on the mock up. And then I took off the mock up, lined it up to the paper pattern and trimmed away the portion that was pinned off.

The next step is to go ahead and cut the real fabric! Laying out the fabric: Since my fabric is a one way stretch, I choose to have the stretch be across the body horizontaland the non-stretch grain will be vertical.

This way all the seams are more stable, and each panel can stretch to fit the body as you moves. I have marked the stretch side on the picture above.

Patterns: Here are my paper patterns all laid out on the main fabric. I laid the fabric out in double layers. In the photos, you can see there are also a few pieces for the pants in the mix as well.

I will write an Instructable for the pants later. Make sure you follow the grain line of the fabric to the grain line of your pattern pieces.

Pin your paper pattern to the fabric, mark the placements for the lacing detail, and cut carefully around.

Turn the cut pieces around and mark the mirrored lace details placements on the underside. Flat Binding trim: You can create your own trim by using the main fabric.

Rudolph Reindeer Costume 0. Sexy Dresses for Women, Mini Club Dresses different sizes The short sleeves go to the elbow and look great on my heavyish arms.

You can either use a bias tape maker, or just pin and iron to create the crease. After all pieces are cut, carefully pin the lace in place according to the marked spots and sew.

08.03.2020 – Body And Soul Teddy 0. Crotchless Wet Look Diva Panty 0. The 3x fits perfectly and I don’t feel like the shirt is too tight or too loose.

Then place the binding around the lace accordingly, pin and sew. This is a very critical detail, so try to practice on scrap fabric first. For the front, there are 4 lace locations 2 on each side.

Pin the lace and binding in place and sew. See reference picture above for how it should look when finished.

Venus black lace panel cut out body 7 plus list

For the backthere are 4 lace locations 2 on each sleeve and shoulder blade and 2 flat bindings as well. The binding is located above the lace and around the shoulder blade to the bottom hem.

The center back binding gets sewn on later. After all the detail parts are sewn, the next steps will be to assemble the main garment.

Do not sew the front and back collar together yet. It should still be open. For this seam, there are two zippers on each end.

I usually wear a juniors XL or a womens M or L. Black lace panel cut out body 7 plus Diva Open Crotch Lace Shorts 1.

Sew the distance in between. The wider seam allowance will allow the zipper teeth to be exposed without buckling the fabric.

Repeat this step on the other side.

Now pin and sew separating zipper at center front edge. After all the seams are in place, put on the jacket to check the fit.

Black lace panel cut out body 7 plus white

Take in and let out as needed. Adding finishing touches: 1 Finishing seam allowance: If you have an over lock machine, over lock all the raw edges inside the jacket to prevent fraying.

Or spray anti fray solutions on all of the seam allowances.

Center front zipper b. I had a blast making this jacket, and I hope you will too! Participated in the Halloween Epic Costumes Challenge. Reply 8 years ago on Step 3.

The pattern pieces really challenged my imaginations and stretched my pattern making skills. I hope these patterns will give you a good starting point.

Reply 8 years ago on Introduction. I am very much a ‘fly by the seat of yr pants’ person and used to making changes and adaptations while I get along, but if needed I will ask you.

Introduction: Amber’s Cropped Jacket. By vasarian Seattle Cosplay Follow. More by the author:. About: Rainy city makes me want to craft a rainbow.

Grid view List view. Black lace panel cut out body 7 plus The sheer lace garter is the perfect complement to your sexiest stockings. While not a true off-shoulder top, the neck opening is rather wide.

Add Teacher Note. Patterns: If you are not comfortable drafting patterns from scratch you can buy a pattern with a band collar with kimono style sleeves.

Butterick and Vogue should have similar styles. From there you can modify the pattern to look like the costume.

Plus Size Lace Cut Out Dress – AVE

It took me a while to figure out that this project required a 3 piece Kimono sleeve style and not raglan sleeve. For your reference the ruler in the picture is 18″.

As you can see the Side front panel is longer than usual. This was done on purpose. Also the side back and under sleeve panel is combined into one piece.

This process took me a while to figure out. When sewing the two parts together, there are a lot of reverse curve lines, so you have to manipulate the fabric in order to sew smoothly.

The advantage of using this pattern design is that it eliminates the excessive underarm bunching that comes with a traditional Kimono sleeve.

This pattern however, will still give the same clean look on the front and back that you come to expect from Kimono sleeves.

Black lace panel cut out body 7 plus ribkoff recipes

Tips: To mark the placement of the lace details, I punched holes in the pattern with a pencil tip. Make sure to label all the pattern pieces with where they go front, back, sleeve, side panel, etc.

Tips: I also added notches to line up the pieces when I sew. Did you make this project? Share it with us! I Made It!

Toddlers Shoes With Anti-slip Sole by sun. Starting a Handmade Business 8, Enrolled.